JBL CONTROL25-1-WH

The Control 25-1 is a two-way 5 speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors. This makes Control 25-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.Main Features:5- woofer with woven fiberglass cone3/4 PEI diaphragm tweeter with fluid coolingContemporary, high-design appearanceBuilt-in InvisiBall mounting hardware*, plus available U-bracketWeather resistant enclosure and transducersWide 100 x 100 coverage100 Watt power handling (200 Watt program) in direct 8 setting, plus built-in 30 Watt 70V/100V multi-tap transformer.High fidelity sound character with broad frequency response of 60 Hz 20 kHz.Specifications:Frequency Range (-10 dB):60 Hz to 20 kHzFrequency Response (+/-3 dB):85Hz – 17 kHzPower Rating:200 W Continuous Program (2 hrs)100 W (400W peak), Continuous Pink Noise (2 hrs)75 W (300W peak) Continuous Pink Noise (100 hrs)Maximum Input Voltage:25.3 V RMS (2 hrs), 50.6 V peakMaximum SPL:110 dB ave. Continuous Pink Noise (116 dB peak)Sensitivity:90 dB, 1W/1m (ave. 100 Hz 10 kHz)Coverage Angle:100 x 100Directivity Factor (Q):6.04 (averaged 1kHz 16kHz)Directivity Index (DI):7.6dB (averaged 1kHz 16kHz)Nominal Impedance:8 ohms (THRU setting)Crossover Type:2nd order low-pass, 3rd order high-passTransformer Taps:70V: 30W, 15W, 7.5W, 3.7W100V: 30W, 15W, 7.5WInsertion Loss <0.94 dB at any tap settingThru Setting: 8 nominalRecommended Protective High-Pass:60 Hz high-pass (24 dB/oct) (for 8 operation and for all 70V/100V taps settings).Low Frequency Driver:135 mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.High Frequency Driver:19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton voice coil former.Enclosure Material:High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.Grille:Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-25WMG-1 (&-WH) available with WeatherMax multi-layer foam and tight-weave mesh vapor barrier backing.Installation:InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-25UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.Environmental:IP-44 per IEC529 (IP-55 when installed with the optional MTC-25WMG-1 WeatherMax grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-25WMG-1 WeatherMax grille for breaking up driving rain and for especially difficult environments.Termination:Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.Agency Rating:ROHS-compliant; Transformer UL Recognized per UL1876Colors:Black (RAL9004) or white (-WH, RAL9016)Dimensions (H x W x D):243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in); 203 mm (8.0 in) deep total when mounted on InvisiBall wall-mount bracket.Net Weight:3.4 kg (7.5 lbs)Shipping Weight:8.16 kg (18 lbs) for the pair-pack (for 2 speakers)Included Accessories:InvisiBall wall-mounting system), 6 mm x 100 mm hex keyOptional Accessories:MTC-25UB-1 Yolk-type U-bracket (&-WH)MTC-25WMG-1 WeatherMax grille with backing (&-WH)MTC-28/25CM Ceiling-Mount InvisiBall adapter (&-WH)